Cold Roll Coil CRC DC01 DC02 DD11 DD12 DD13 SPCD SPCC 

1008 1010 Mild Carbon Steel Coil

CRC It refers to the steel strip that is directly rolled into a certain thickness with a roll at room temperature and rolled into a full coil with a winder. Compared with hot-rolled coils, cold-rolled coils have a brighter surface and a higher finish

Since there is no heating during the production process, there are no defects such as pits and scales that often occur in hot rolling, and the surface quality is good and the finish is high. Moreover, the dimensional accuracy of cold-rolled products is high, and the performance and structure of the products can meet some special requirements for use, such as electromagnetic properties and deep drawing properties.

Product parameters

Chemical Composition

Mechanical Properties

Product Advantages

1.The cold-rolled coil products are accurate in size, uniform in thickness, and the thickness difference of the coils generally does not exceed 0.01-0.03 mm or less, which can meet the requirements of high-precision tolerances.

2.It is possible to obtain extremely thin strips that cannot be produced by hot rolling (up to 0.001 mm or less).

3.The surface quality of cold-rolled products is superior, there are no defects such as pitting, hot-pressed iron oxide, etc.,which are often found in hot-rolled coils, and coils of different surface roughness (glossy or hemp) can be produced according to user requirements. Rough surface, etc., to facilitate the processing of the next process.

4.The cold rolled plate has a good mechanical properties and process properties (such as higher strength, lower yield limit, good deep drawability, etc.).

5.High-speed rolling and full-continuous rolling can be realized with high productivity.

Application

It has a wide range of uses, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, food cans, etc. Cold-rolled thin steel plate is the abbreviation of ordinary carbon structural steel cold-rolled plate, also known as cold-rolled plate, commonly known as cold-rolled plate, sometimes mistakenly written as cold-rolled plate. The cold plate is a hot-rolled strip of ordinary carbon structural steel, which is further cold-rolled into a steel plate with a thickness of less than 4mm. Due to rolling at room temperature, no iron oxide scale is produced. Therefore, the cold plate has good surface quality and high dimensional accuracy. With the addition of annealing treatment, its mechanical properties and process properties are superior to hot-rolled thin steel plates. In many fields, especially In the field of home appliance manufacturing, it has gradually replaced hot-rolled steel sheets.

Others

Cold-rolled ordinary thin steel plate: cold-rolled from ordinary carbon structural steel or low-alloy structural steel. The surface quality of cold rolled sheet is better. Has good stamping performance. It is required to ensure that the cold bending and cup tests are qualified, and it is often used in industries such as automobiles and raw materials for coated sheets.

Cold-rolled high-quality thin steel plate: mainly includes various high-quality steel cold-rolled thin plates, the most commonly used is carbon structural steel plate, especially cold-rolled thin steel plate for deep drawing, which is cold-rolled thin plate made of low-carbon high-quality steel 08Al. The quality is divided into three groups; Ⅰ, Ⅱ, Ⅲ, which represent special high-grade, high-grade, and higher finishing surfaces, respectively, and are divided into ZF, HF, and F grades according to the drawing level (representing the most complicated and very high-end surface for punching and drawing). Complicated and complex parts). According to the allowable deviation of steel plate thickness, it is divided into two levels of precision, A and B, and is widely used in the automobile and tractor industry.

Cold-rolled steel plate: smooth surface, excellent processing, used in home appliances such as automobiles, refrigerators, washing machines, industrial equipment, and various building materials. With the development of the economy, cold-rolled steel sheets have been called necessary materials in modern society. Classification of cold-rolled products: hot-rolled pickling, hard-rolled coil, ordinary cold-rolled, galvanized (electro-galvanized, anti-fingerprint, hot-dip galvanized), galvanized, electro-tinned, color-coated, electrical steel (silicon steel sheet) wait.

Inspection

Every step before leaving the factory has been strictly inspected and measured.

Packing

Metal shell waterproof seal + steel belt fixed + wooden frame fixed